Wireless smart switching based microcontroller atmega328

Made Kamisutara, Slamet Winardi, Tubagus Purworusmiardi

Abstract


Smart Wireless Switching (WSS) is electronic switch based micro controller that can be controlled remotely without using cables (remote control, smartphone, and the internet). Moreover, it can work automatically based weather and timer sensors.In this study, the electronic switch used an ATmega328 microcontroller chip which used a real-time operating system, Arduino. It would be planted in the microcontroller chip. The operating system used the programming language Arduino C. The electronic switch was controlled remotely via the three options, namely remote control, internet or smart phones that used the Android operating system.Each electronic switch had its own address which would determine the address of the device turned on the switch. In addition, it could work ON or OFF based on the sensor and the programmed time.The electronic switch is very effective if it is applied in everyday life. This Smart Switching could also be accessed using the internet so that it could be controlled from a remote location.


Full Text:

PDF

References


ArdikusumaTantrapraja. 2011. PerbaikanFaktorDayauntukBebanRumahTanggasecaraOtomatis Surabaya: PENS-ITS.

Budiharto, W. (2012). Aneka ProyekMikrokontroler. Yogyakarta :GrahaIlmuYogyakarta

Datasheet ACS712 from Allegro, http://www.allegromicro.com

Iyuditya, Erlina Dayanti.2013. Sistempengendalilampuruangansecaraotomatismenggunakan pc berbasisarduinouno, SekolahTinggiManajemenInformatikaSTMIK (IKMI), Cirebon.

Kadir, Abdul 2013. Indonesia:Andi publisher. PanduanPraktisMempelajariAplikasiMikrokontrollerdanPemrogramannyaMenggunakan Arduino.

Nurmawati, N. (2014) ‘ANALISIS FAKTOR FAKTOR YANG MEMPENGARUHI KONSUMEN DALAM PENGAMBILAN KEPUTUSAN PEMBELIAN PRODUK MIE INSTAN MEREK INDOMIE’, Jurnal Teknik Industri, 10(18).

Nurmawati, N. (2014) ‘FAKTOR-FAKTOR YANG BERPENGARUH DALAM PERBAIKAN KUALITAS LAYANAN BERDASARKAN HARAPAN PELANGGAN PT X’, Jurnal Teknik Industri, 13(21).

Nurmawati, N. (2014) ‘PENGENDALIAN PERSEDIAAN BAHAN BAKU RUBBER SINTETIS UNTUK PRODUK SEALING DENGAN MENGGUNAKAN METODE ECONOMIC ORDER QUANTITY’, Jurnal Teknik Industri, 11(19).

Nurmawati, N. (2014) ‘Perencanaan Produksi Pada Pembuatan Tire Fond Di PT. X’, Jurnal Teknik Industri, 15(23).

Nurmawati, N. (2014) ‘STRATEGI BAURAN PROMOSI TERHADAP PENINGKATAN VOLUME PENJUALAN INDOMART TOKO GUDANG RABAT SIDOARJO’, Jurnal Teknik Industri, 9(17).


Refbacks

  • There are currently no refbacks.